1 Copper residue, no fault
2 Short circuit conductor / land for soldering
3 Copper residue, no fault
4 Copper residue (spacing too small) |
|
Our PCBs and inner layers for multilayers undergo an automated visual inspection depending on the composition.
This inspection device covers the entire PCB and examines it for:
• Short circuits
• Restrictions
• Breaks
• Foreign particles
This inspection system locates any discrepancies in the completed PCB and shows it to the operator on a screen. He then decides whether this is an actual defect or just a false. With this method, each PCB can be inspected 100 %. |